Manual

Medium-power DAF BE motors are utilized in a variety of commercial vehicles that move cargo within or between cities. Small-tonnage commercial vehicles are equipped with BE series models. They can sustain fairly large loads and have a high degree of dependability. These units are very cost-effective because they don’t require a lot of money to […]

The DAF BN 52 is a two-liter engine. Four cylinders with two valves each and a stroke of 97 mm. This engine has shown itself to be the best because of its strength, quality, dependability, and fuel efficiency. Van DAF 400-Series 428-435 2.5 D was used. Engine manual DAF BN 52 Specifications Engine’s type diesel […]

The FR 152 is a 4.5-liter, four-cylinder, intercooled, turbocharged diesel engine. Power 152 kW (207 hp) at 2100 rpm. At 1400–1800 rpm, the maximum torque is 760 Nm. Clean combustion with post-treatment for Euro 5 emissions using selective catalytic reduction (SCR). The cylinder block has straight cylinder bores and is supported by a cast iron […]

Vehicles with DAF GR220 engines have excellent performance because they are dependable and effective. Increased productivity, operational flexibility, and fewer gear changes are the outcomes of improvements made to increase torque over a broad range of speeds. The GR220’s fuel delivery system combines an injection system with a high pressure rail. Additionally, the GR220 engines’ […]

The DAF HS825 is a V-shaped diesel engine that can produce 240–362 horsepower (180–270 kW). It has an engine capacity of 8.3 liters and six cylinders with two valves each. For the DAF F2700 and special construction equipment, the DAF HS 825 engine was manufactured between 1990 and 1993. Highlights Large motor resource; ease of […]

DAF’s efforts to create heavy-duty diesel engines utilizing the most recent design and manufacturing techniques have resulted in all DAF MX engines. The DAF MX 265’s unique driving conditions are guaranteed by its high performance and substantial torque, while its compact design and the newest materials enable weight reduction while maintaining maximum service life. The […]

The new DAF MX 300 engine’s common rail injection system enables pre-injection, post-injection, or a combination of both, as well as high injection pressures of up to 2,500 bar. Finer fuel atomization and numerous other opportunities to maximize combustion and guarantee the lowest emissions, noise, and fuel consumption result from this. Maximum fuel combustion is […]

The DAF MX 340 engine was developed for a number of reasons, including compliance with the new environmental standard Euro 5. Naturally, the developers aimed to create an extremely dependable and long-lasting engine. Additionally, it provides various torque values for improved driving comfort. The MX 340 blends clever innovation with tried-and-true cutting-edge technology. The timing […]

The DAF MX 375 is an intercooled, 12.9-liter, in-line, 6-cylinder, 24-valve turbocharged engine. A single-stage turbine with a controlled check valve powers the MX 375. This engine’s high torque of up to 2500 Nm at low revs of up to 1410 rpm enables the motor to operate at its peak efficiency. The piston stroke and […]

Six-cylinder, in-line, turbocharged, intercooled diesel engines make up the DAF MX-13 engine series. The corresponding numbers represent the three engines in the series, each with a 12.9-liter capacity and a power of 300, 340, and 375 kW. Modern rail injection technology, a variable geometry turbo compressor, and sophisticated controls for optimal efficiency are all features […]