Category: DAF

The DAF WS 282 diesel engine can produce 282 kW and 384 horsepower. This V-shaped DAF engine has six 11.6-liter cylinders and twelve valves. DAF 95 FA 95.380, DAF 95 FAT 95.380, DAF 95 FT 95.380, and DAF 95 FAC 95.380 are compatible. Specifications Engine’s type diesel Power output, hp / kW 384 / 282 […]

The DAF MX 375 is an intercooled, 12.9-liter, in-line, 6-cylinder, 24-valve turbocharged engine. A single-stage turbine with a controlled check valve powers the MX 375. This engine’s high torque of up to 2500 Nm at low revs of up to 1410 rpm enables the motor to operate at its peak efficiency. The piston stroke and […]

Because of its dependability, power, quality, and fuel efficiency, the DAF WS 242 engine has shown itself to be the best. This V-shaped engine has six cylinders, twelve valves, and 11.6 liters of displacement. About thirty years ago, the first batch of DAF WS motors came off the assembly line. Following several modifications, these units’ […]

Engine DAF WS225 (WS 225 Ati) is a 11,630 cc diesel engine with six cylinders, two valves per cylinder, a piston stroke of 146 mm, and a cylinder diameter of 130 mm. made for DAF Series 95.310 in 1987. Trucks have made extensive use of the DAF WS225 engine. It has established itself as the […]

Vehicles with DAF GR220 engines have excellent performance because they are dependable and effective. Increased productivity, operational flexibility, and fewer gear changes are the outcomes of improvements made to increase torque over a broad range of speeds. The GR220’s fuel delivery system combines an injection system with a high pressure rail. Additionally, the GR220 engines’ […]

The FR 152 is a 4.5-liter, four-cylinder, intercooled, turbocharged diesel engine. Power 152 kW (207 hp) at 2100 rpm. At 1400–1800 rpm, the maximum torque is 760 Nm. Clean combustion with post-treatment for Euro 5 emissions using selective catalytic reduction (SCR). The cylinder block has straight cylinder bores and is supported by a cast iron […]

The new DAF MX 300 engine’s common rail injection system enables pre-injection, post-injection, or a combination of both, as well as high injection pressures of up to 2,500 bar. Finer fuel atomization and numerous other opportunities to maximize combustion and guarantee the lowest emissions, noise, and fuel consumption result from this. Maximum fuel combustion is […]

Six-cylinder, in-line, turbocharged, intercooled diesel engines make up the DAF MX-13 engine series. The corresponding numbers represent the three engines in the series, each with a 12.9-liter capacity and a power of 300, 340, and 375 kW. Modern rail injection technology, a variable geometry turbo compressor, and sophisticated controls for optimal efficiency are all features […]

The DAF HS825 is a V-shaped diesel engine that can produce 240–362 horsepower (180–270 kW). It has an engine capacity of 8.3 liters and six cylinders with two valves each. For the DAF F2700 and special construction equipment, the DAF HS 825 engine was manufactured between 1990 and 1993. Highlights Large motor resource; ease of […]

Medium-power DAF BE motors are utilized in a variety of commercial vehicles that move cargo within or between cities. Small-tonnage commercial vehicles are equipped with BE series models. They can sustain fairly large loads and have a high degree of dependability. These units are very cost-effective because they don’t require a lot of money to […]